We have been asked where to find the most current software that has been released for ProjectCuracao. This software is hosted at github. https://github.com/projectcuracao There will be a new release this weekend.
We have been asked to put together tables showing the i2c and GPIO mappings for both the Raspberry Pi and the Arduino Battery Watchdog in Project Curacao. While you can figure it out from the software and comments, it would […]
March 7th, 2014 has been set as the Project Curacao deployment date in Curacao. The box will fly down with us in checked luggage with the batteries removed. We will provide the TSA with a description of the box (it […]
As of today, the current state of the software in Project Curacao is as follows: – Arduino Battery Watchdog: The watchdog is reading and reporting data back to the main software in the Pi via a serial link through level […]
Bootloader Issues with Arduino Mega 2560 If you are interested in using Solar Power on the Arduino, check out SunAir. Hit a significant roadblock on the Battery Watchdog last week. During one development session, the Arduino Mega 2560 we are […]
The latest RasPiConnect configuration file and pictures of all five control screens have been posted on the page https://www.switchdoc.com/raspiconnect/. This should answer some of the questions submitted via email.
As we get closer to system deployment (March 2014), I am running more system level tests. The first of these (the week of November 17-24) revealed the following problems that need to be addressed: – The DHT22 sensor is returning more errors […]
As of today, the current state of the software in Project Curacao is as follows: – Arduino Battery Watchdog: The watchdog is reading and reporting data back to the main software in the Pi via a serial link through level […]
Measuring negative currents with the INA219 Note: These INA219 devices have been replaced by our 3 Channel INA3221 board. We read somewhere that the Adafruit C++ library has a bug in the INA219 High Side current measuring device library so […]
Today I have posted the first of six articles describing my current “obsession”, Project Curacao. This is a solar powered environmental monitoring box based on a Raspberry Pi and Arduino Mega 2650 controlled by the iPhone/iPad app RasPiConnect. It will be hung on […]
Copyright © 2025 | MH Magazine WordPress Theme by MH Themes
