WeatherRack2 Error Codes Certain data values coming from the WeatherRack2 indicate errors. You should scan for these values and modify your data appropriately. Here is a chart of the error values, their hex codes and the decimal equivalents. For example, […]
WeatherRack3 Data Formats SwitchDoc Labs is building a new weather station and software with the WeatherRack3, a new generation no-moving parts 7 in 1 sensor. We are building a solar powered box around the WeatherRack3 that will keep the […]
Radiation is all around us. Everywhere! It’s invisible and requires an instrument to detect it. A small amount of radiation is always present and is not harmful. But when the radiation level changes, it’s good too know about it! RadSense […]
Tutorial: Changing MQTT Server IP on Solar SkyCam The MQTT Server IP is set during initial configuration of the Solar SkyCam remote WeatherSense camera. The Solar SkyCam is a solar powered remote camera supported by SkyWeather2 and the WeatherSense product […]
SmartGarden3 Read Bluetooth Sensors Fix for Pi SmartGarden3 is a an easy to put together system for managing your garden inside and outside. This posting talks about how you can do scanBluetooth if you are having a problem with […]
SmartGarden3 is a an easy to put together system for managing your garden inside and outside. This posting talks about how you can do SmartGarden3 Test, Fix and Scanning. What is SmartGarden3? The SmartGarden3 system (available here) allows you to […]
The SmartGarden3 has a lot of options and features not immediately obvious. This posting talks about how to update your software on the SmartGarden3 ESP32 Extender. What is SmartGarden3? The SmartGarden3 system (available here) allows you to build your own remote […]
Grove Cable Extender for the SmartGarden3 – Pair Our SmartGarden3 (for longer Grove Cables) and ThunderBoard Lightning Detector customers (to get away from pesky EMI) have been asking for longer than 50cm Grove cables. Here is our Grove Cable […]
Tutorial: Adding LED Grow Lights to SmartGarden3 Using the Wiring Hub This is a tutorial showing how to add a controlled LED Grow Lights to SmartGarden3 using the SmartGarden3 Wiring Hub. What is SmartGarden3? The SmartGarden3 system (available here) allows you […]
Using the SmartGarden3 Wiring Hub for your Projects The SmartGarden3 Hydroponics unit comes with a wiring hub to connect up the power, pump and light. It turns out that this board is really handy for adding additional devices to relays […]
Copyright © 2024 | MH Magazine WordPress Theme by MH Themes
