MouseAir Version 2 Takes Flight in New Video! The SwitchDoc labs project MouseAir is a bit more whimsical than WeatherArduino,BeaconAir or Project Curacao. This project detects the cat, loads a furry fake mouse in to a launching slot, fires a […]
BeaconAir On Raspberry Pi / iBeacons BeaconAir is a Raspberry Pi based project that reads the advertising packets coming from iBeacons and roughly calculates the physical position of BeaconAir by Trilateration. This is an application that uses the SwitchDoc Labs new iBeacon Python […]
WeatherPiArduino Complete and Ready for the Caribbean Deployment The WeatherPiArduino board is now up and finished. The board to the right of the WeatherPiArduino is a new board called the SwitchDoc Dual WatchDog. It implements an external watchdog function for both […]
Drawing and Displaying Graphs on Raspberry Pi and RasPiConnect using MatPlotLib We often have data that is better shown as a graph rather than a table. It is much easier to pick out a pattern when you show the data visually. […]
iBeacons Review and BeaconAir I just finished the development of a new SwitchDocLabs project, BeaconAir. BeaconAir is a portable Pi device to determine ones position in the house by trilateralation from three iBeacons. The RasPiConnect BeaconAir control panel is below: […]
Real Time Clock Python Libraries For Raspberry Pi – DS1307, DS3231, PCF8563, MCP79400 – Reviews/Results For devices like the Raspberry Pi, a Real Time Clock (RTC) is needed anytime the device is not connected to the Internet (if you care […]
MouseAir Redesign Update We are working away on designing and building Version 2 of MouseAir. There were a lot of projects ahead of this but it’s back on top. Following is the latest block diagram. We replaced the relays with […]
Solar Power and The Raspberry Pi – Update on Project Curacao and the Latest Glitch A major glitch in the Project Curacao Solar Power control system happened last week, detected by my trusty friend the RasPiConnect Control Panel. The Solar […]
WeatherPiArduino SDL_RasPiGraphLibrary RasPiConnect / ArduinoConnect Library Released WeatherPiArduino uses the MiloCreek app RasPiConnect (or ArduinoConnect) to display and the WeatherArduino board. To make this easier I developed the SDL_RasPiGraphLibrary for the Simple Line Graph Controls in RasPiConnect. In this […]
WeatherPiArduino RasPiConnect Control Panel Below is the RasPiConnect control panel for the WeatherPiArduino. The software for the WeatherPiArduino was released last week. The control panel is built on the milocreek.com iPhone/iPad app ArduinoConnect. Either RasPiConnect or ArduinoConnect can talk to […]
Copyright © 2024 | MH Magazine WordPress Theme by MH Themes
