Project Curacao

Wind Turbine (50W) Loaded Results

Update (03/26/14):  The Wind Turbine was deployed down in Curacao two weeks ago.  The actual data from the Turbine matched this article quite well.  About 60-90ma at 15 MPH.  Not much (and not nearly enough to run the box – […]

Project Curacao

Final Box for Project Curacao

As we ramp up to the last few weeks before deployment, our last task is to put Project Curacao in the final box.  Here is the NEMA enclosure purchased on Amazon (BUD Industries NBB-15253 Style B Plastic Outdoor NEMA Box […]

Project Curacao

Windstorm on RasPiConnect

Here is a screen shot of RasPiConnect capturing the wind storm that came through last weekend.  We had the 15W Wind Turbine hooked up and reporting through the Project Curacao software.  It was fortuitous that the wind storm came through. […]

Arduino Software

Project Curacao Software Status (01/22/14)

We are approaching the final testing deadline (February 1st). As of today (01/22/14), the current state of the software in Project Curacao is as follows: – Arduino Battery Watchdog:   Control of the wind turbine (selection between solar and turbine). […]